Meteosat Third Generation (MTG) is EUMETSAT’s next generation of geostationary satellites, following on from earlier successful missions.
This next generation, following on from Meteosat Second Generation, will provide an evolution of the imaging service, including a new Lightning Imager, and a state-of-the-art atmospheric sounding service providing measurements in the infrared and ultraviolet spectrum.
To achieve these services, MTG will see the launch of six new geostationary satellites from 2022 onwards. The satellite series will be based on 3-axis platforms and comprise:
- Four Imaging Satellites (MTG-I) (20 years of operational services expected)
- Two Sounding Satellites (MTG-S) (15.5 years of operational services expected)
The full operational configuration will consist of two MTG-I satellites operating in tandem, one scanning Europe and Africa every 10 minutes, and the other scanning only Europe every 2.5 minutes, and one MTG-S satellite.
For further details on the instruments onboard the MTG satellites, including their scanning modes, follow the respective links:
Flexible Combined Imager (FCI)
Lightning Imager (LI)
Infrared Sounder (IRS)
Ultraviolet Sounder (UVN)
The Meteosat Third Generation Ground Segment will acquire data from all the MTG satellites, and generate, archive and distribute the products. It will also provide the capabilities to command and control the satellites and the ground segment itself.
The ground segment consists of:
- The Telemetry, Tracking and Control (TT&C) ground stations — the TT&C interface between the Space Segment and the Mission Control Centre.
- The Mission Data Acquisition (MDA) ground stations — the payload data interface between the Space Segment and the Mission Control Centre.
- The Mission Operations Facility (MOF) — provides functions for the preparation, planning and operation of the system, including satellite and mission operations and flight dynamics.
- The Instrument Level 1 Data Processing facilities (IDPF-I and IDPF-S) — these extract the measurements from the sensors. They also perform a series of functions for the generation of level 1b data and the processing of level 1c data.
- Level 2 Processing Facility (L2PF), for the extraction of centrally generated products.